Installation And Fixing Method of Cement Partition Board

1、 Use expansion bolts

The most common way to fix cement partition boards during installation is to use expansion bolts. Firstly, drill holes on the cement wall and select expansion bolts of appropriate size for fixation. Insert the expansion bolt into the drilled hole and tighten it with a wrench. This fixing method is simple and easy to implement, but attention should be paid to the matching of the specifications and aperture of the expansion bolt to avoid unstable installation.

2、 Use sealant

In addition to expansion bolts, sealant can also be used as a fixing method. Apply a layer of sealant on the cement wall first, then stick the cement partition board onto it and knead it firmly. Sealing glue can fill pores, enhance adhesion, and make cement partition boards more sturdy. However, when using sealant for fixation, it is necessary to ensure that the wall surface is flat, otherwise it will affect the fixation effect.

3、 Using steel wire mesh

For larger cement partition boards, steel wire mesh can be used for fixation. First, drill holes on the cement wall, then pass the wire mesh through the holes, wrap a layer of foam board on the back of the cement partition board, and then fix the foam board and the wall together with the wire mesh. This fixing method is more suitable for outdoor occasions, and when using steel wire mesh, attention should be paid to the selection of wire diameter and tension.

In summary, there are various ways to install and fix cement partition boards, and the appropriate method can be selected according to the actual situation. During the installation process, attention should also be paid to the use of tools, matching of specifications, and the flatness of the wall to ensure installation quality and stability.